Definately not a good sign. Mine boots fine with every boot (But starting to get uncommon failures as the discs are getting quite worn out after 3 years of intense usage).
much easier because my swap magic CD was very very unstable, used to take me about 10~ tries to get the damn cd to load..
Yes. If the ELF is going to be launched by the "Quick launch buttons", the you only need to reconfigure FMCB with the FMCB configurator.
So, if I were to add an additional ELF to my FMCB, is it possible to move the ELf file to anywhere on the MC and use OSD to set the path and name?
If the ELF is one of those that are launched from an option in the hacked OSDSYS (And you wish to launch the ELF from somewhere else), then you should refer to the FMCB guide for instructions.
The ELFs are not hard linked to FMCB's main executable (Usually, there is no need to reinstall anything).
Or do I have to put the ELF file in the INSTALL folder and reinstall FMCB?
Unless you are going to modify/customise FMCB's main executable (Then you need to reinstall it).
Usually, you can just install FMCB over an old installation. Your old configuration will only be overwritten if you say so.
If I were to reinstall FMCB, do I need to delete my current FMCB or can I just install over it?
SCPH-10000 S. MINOKAMO v1.01 (Defunct)
SCPH-10000 S. KISARAZU v1.00 (faulty)
SCPH-15000 S. KOHDA (With warranty seal!) :D
DESR-5100 S. EMCS