The above video goes away if you are a member and logged in, so log in now!
The test on both my v4 & v12 had positive results. All changes made to OSD settings were detected.
All mine seem to have worked ok, except the V9 with a CC 2.0 SLE chip.
30001 - V4...OK
30001R - V4...OK
30001R - V5...OK
50001/N - V9...no test
79001 - V16 Silver slim...OK
PM sent with screen shots.....
SCPH-30001 [V4] - unmodded (2)
SCPH-30001-R [V5] DMS4 Pro SE
SCPH-50001-N [V9] CC 2.0 SLE
SCPH-79001 [V16] Silver - unmodded
basically it works very well!
i changed my optical out settings (which were enabled for some reason) on my v4(30001r) and the changes were detected i just recently aquired the use of a v12(70001) & tests returned positive as well.
thank you man
Last edited by iancer; 09-30-2008 at 05:33 PM.
Reason: i own v4 not v5
PAL V7 SCPH-39003
FMCB 1.7 MC: Official Sony 8MB
GAMEware Scart and Stereo Audio Cable with Guncon Connector
*Video output settings: RGB
*optical audio out disabled
The reason the image is spliced together is because the flash on my camera garbled the top half of my pic so I had to take a closeup pic and merge it with the original pic.
I'll try it out tomorrow
It's on my "todo list"
All test changes are showing up both the V3 and V7 with no issues at all.
50004 v9 and 70001 v12, all setting retrieved perfectly even when changed.
Settings are detected fine on my NTSC v9. Will post variables and test changing settings after Fringe is over.
like a charm
like a charm –
Wel, it worked properly here
Attached some pics, not good quality (kinda ugly, taken by digital camera pointing through TV), but hey, it works
Changed time format, to 24h, date format do DDMMYYY, timezone, screenType with sucessful reading
First ran with chip matrix infinity 1.93
Second ran with chip disabled, with fmcb 1.7
P.S. waiting on fringe too
Last edited by probert; 09-30-2008 at 11:56 PM.
Reason: showing pics and some info