FreeMcBoot do not run on my SCPH - 77003
Hi,
I bought a second hand PS2 recently and I installed FMcB to its' MC and tried to run the console but it failed. When I connect the MC and turn on the console, the screen just flickers on and on. But when I format the MC and then reload the console then it works as usual.
How I installed FMcB to the memory card :
1) I used a friends PS2(SCPH - 77002) of which the MC had FMcB already installed. Then I inserted my MC to the MC slot 2 of that PS2 and installed FMcB through a flash drive.
2) I used the other PS2 and installed FMcB via the regular 007-Nightfire method as I did not want to remove my warranty sticker.
By using the method : 1 , I installed FMcB 1.6, 1.7, 1.8, 1.8b, 1.8c -beta. I also installed the 1.8 and 1.8b versions under Normal and Multi install options. Yeah, this is sad.
Also my MC (after installing FMcB) works on the SCPH77002.
Configuration of my PS2 : SCPH - 77003, 6C, PAL, region should be UK, slim console.
Configuration of the auxiliary PS2 : SCPH - 77002, 6C, PAL, region - Australia, slim console.
The auxiliary PS2 has been used before as in method 1 to successfully install FMcB and run on a SCPH 5xxxxx slim line console.
So, what should I do now ?
To add a little more detail
The games (non-backups/originals) that did work on the auxiliary PS2 (already booted with FMB) also did run on my SCPH-77003 (without FMB, of course).
FMB was properly installed in the auxiliary PS2's MC and did boot that PS2 successfully, the flash drive was loaded through an add-on (USB loader or something like that I think) that was installed over the FMB matrix.
Thanks for the suggestion RandQalan, I'm going to try it tomorrow.