FMCB Installer Boot Tutorials

**RandQalan** · 02-08-2012,03:31 AM

Ok and good luck

**ps2n** · 02-08-2012,03:35 AM

Thanks, then I'll know if it works or not.

**RandQalan** · 02-08-2012,03:51 AM

It works I know I had a model 77001 of course USA but it worked fine with Official MC and still using that same MC to boot on my 50001 model like internal Hard Drive with OPL

**ps2n** · 02-08-2012,03:56 AM

Ok, I will try with the original MC, when it comes.

**ps2n** · 02-21-2012,12:10 PM

I received the new Sony original MC I did the installation of FMCB 1.8b noobie package and works well.
With the other MC did not work, because it was not original.
Thanks for your help, Regards, Nicholas.

**smarkies** · 03-15-2012,03:34 AM

Is there any way to make this?

After loading the Free McBoot logo, the OPL elf will launch? No problem with the OPL boot cause it is set automatic to view the game list.

Because I want it to be more user friendly, because my younger (6yrs old) brother sometimes play with my ps2, because he used to play it with the disc on.

Thank you..

**andongolile** · 03-16-2012,05:58 AM

how ca i get allowed to download? i have tried somany times but it just says i dont have permission to access this page

**golabi2** · 05-04-2012,05:48 AM

i have a 50004 taht have m3 modchip.
i burnd alot of cd of freemcboot but they don't work!
playstation 2 logo shows and then it shows please insret...
what file must i use to install FreeMCBoot?
i made the iso file of FMCBInstaller but didn't work...
then i burend Noobie_Package but whiteout uLE...
what most i do?!

**mrcordas** · 05-04-2012,05:25 PM

- Extract and burn this (. Iso) of Ulanchelf_CD:here on a CD, with good speed.

- Extract and place the Noobie_Package on a flash drive and insert a USB port of your ps2.
- Launch the cd you burned (will appear ulanchelf) by pressing circle, go to mass :/ (your flash drive) and go to the installer of FMCB (FREE_MCBOOT.ELF).

**rhyne** · 07-28-2012,05:52 PM

Hi,

I've got an entirely unmodded SCPH-15000 unit and tried doing the Swapmagic installation tut. No matter what USB storage device I use (WD external hard disc, generic USB thumb drive, SD card with USB converter, PSP), the Free MCBOOT installer won't load from the USB devices. It only loads Swapmagic and I can't proceed from there. I think I've set the files in the USB devices correctly like the screenshots in the tut.

Any ideas on what I should do? I'm beginning to think that my PS2's USB drive is busted because my PSP won't even let me do the trick. It gets stuck with the "Please wait" message and won't go to USB Mode like it does when I connect it to my PC.

User Tag List

Thread: FMCB Installer Boot Tutorials

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!