The above video goes away if you are a member and logged in, so log in now!
Already have MC Boot but...
Already have MC Boot but... –
Well I have a MC Boot that currently boots on my NTSC-U console. I was wondering if there's anyway I can make it boot on my NTSC-J console without the need of a swapmagic, ar, etc?
I originally got my NTSC-U MC Boot from a friend: He sent me his memory card that had the exploit on it, booted uLoader and then booted FREE_MCBOOT.ELF, then installed via NORMAL INSTALL through the Installer to one of my memory cards.
The only way to get FMCB to work on your NTSC-J console is to have it installed to a MC from a NTSC-J console by running the FMCB Installer from it.
SCPH-30001 [V4] - unmodded (2)
SCPH-30001-R [V5] DMS4 Pro SE
SCPH-50001-N [V9] CC 2.0 SLE
SCPH-79001 [V16] Silver - unmodded
Thanks, I guess that means I need to get Japanese AR etc if i want it on a ntsc-j console =-
No, it means you need a .jp console, not a .jp program. If you run AR.jp on a PS2.us, it still won't work.
Originally Posted by jjr
Wait... nevermind. Yeah, it'll work if you get the right AR program since you plan on installin on your own console. My bad.
Ph34r T3h Cut3 On3s
As long as your NTSC-J isn't a slim PS2, you can just do the PS1 exploit on it. So you would need a PS1 trigger disc to tigger the exploit. After that you can run the FCMB installer.
Hardware: PS2 v7 (GH-022) NTSC | Crystal Chip 2.0 Pro SLE | Sony Network Adapter | 300GB Segate HDD
Software: uLaunchELF 4.40 | HDLoader 0.8c | HDL_Dump 0.8.6+GUI | SMS 2.9 (Rev.3)
My Projects: uLaunchELF - skins/template | skin template readme | documentation (contributor)