OPS2LD Network config with router...

[szczuru]

I was readed tutorial how to config network in OPS2LD but still don't work :/ uLE/SMS with PS2Client works great but OPS2LD with SMB don't. I think the wrong configuration of "Triggering Port" is problem :/ I don't have any active firewalls etc. My PC IP is 192.168.1.100, Gateway - 192.168.1.1, PS2 - 192.168.1.105. My configuration of "Port Triggering":







//Sorry, I don't speak english good and i don't know about notwork configurations a lot

//Edit

I think there is a solution (but I can't try this now :/)

http://www.portforward.com/english/r...y_XI_-_PS2.htm

Of course triggering port 445 not 1024-65535

[Bootlegninja]

you should not have to do any of that. I have a DLINK router and had to open no ports, or disable the firewall. Hell, for that matter, I didn't have to reconfigure the firewall on my PC for that matter either since I have my personal network range already exempted from being blocked.

I use the free ZoneAlarm firewall

I'm willing to bet you don't have proper IP addresses in one ofthe configs or you simply have a firewall on your pc that is screwing teh works. but I can't tell since you don't list that information.

[szczuru]

IP's are configured good (uLE/SMS works). "Native" Firewall in WinXP is OFF. I'll try to delete this triggering/virtual servers and post info later (about 1h). Thanks for fast replay

[Bootlegninja]

You still fail to give any info on what you are using. PC information like Operating system, or anything. this is why it will be next to impossible to help. we can't get good info on what you have to work with.

[Bootlegninja]

have a look at JNABK's guide to see if this will help
http://home.comcast.net/~jnabk2/openps2/networking.html

[szczuru]

I've previously wrote that i'm readed tutorial (i mean JNABK's tutorial). I'm using WinXp SP3, TP-Link router with wifi, PS2 Slim with FMCB 1.8b, OPS2LD v0.5. WinXp configured via JNABK's tutorial. Shared folder od drive D: (NTFS) contains image in *.iso format. Shared name - KH (in OPS2LD -> Network Config -> "SHARE NAME" is "KH" too).

Without "Port Triggering" / "Virtual Servers" still don't work :/ I Can't see game list on "Network" Tab in OPS2LD.

After setting up like in this tutorial (of cource using 445 port):
http://www.portforward.com/english/r...y_XI_-_PS2.htm
Still don't work :/

[JNABK]

I've previously wrote that i'm readed tutorial (i mean JNABK's tutorial). I'm using WinXp SP3, TP-Link router with wifi, PS2 Slim with FMCB 1.8b, OPS2LD v0.5. WinXp configured via JNABK's tutorial. Shared folder od drive D: (NTFS) contains image in *.iso format. Shared name - KH (in OPS2LD -> Network Config -> "SHARE NAME" is "KH" too).

Without "Port Triggering" / "Virtual Servers" still don't work :/ I Can't see game list on "Network" Tab in OPS2LD.

After setting up like in this tutorial (of cource using 445 port):
http://www.portforward.com/english/r...y_XI_-_PS2.htm
Still don't work :/

I think its not your network configurations as your problem, but that your not using the correct game formats in your share folder.

It should not be .iso as the game files, you have to use a special game "file splitting program" that 'installs' the games to the location you wish to play games from.

Here, read this:
http://home.comcast.net/~jnabk2/openps2/installing.html

[szczuru]

Sorry my fault i completly forgot about this... :/

Now all works fine! Thanks for the answers

[j4m3s]

setup without router only crossovercable..?
for win xp pro.. still no luck..
dont know the config for my pc?

[nemesis01]

dont know the config for my pc?

Start>>Run>>CMD>>IPCONFIG /ALL