It would be wise to use Google Translate to post your question in english, as it will most likely be ignored if you don't.
As long as it's configured correctly, any NAS will work with OPL 0.7
No todo USB trabajara. La mayoria si, pero tienes que asegurarte que este defragmentado, ya que OPL tendra problemas en leerlo si los juegos estan instalados en un USB fragmentado.Quote:
Y otra, también vale como USB, sale la lista pero se queda en pantalla blanca
Creo que contestando no solo me ayudarían a mi si no a muchas personas.
Not all USBs will work. Most will, but you must be sure that it is defragmented, as OPL will have trouble reading it if the games are installed on a fragmented USB.
Today I want to test Battlefield 2 on my internal HDD and I start the HDL-SVR 0.9,but I must see, since I use a component cable on my LGLH3000 LCD TV,there isnt any output from component.LG show me "unsupported format".
I have a 6 wire component cable so i try the composit output and that work,but i must manual switch it.O.K.,normal there is no need to see the screen output...
Another solution is to start before the GSM-Selector.But I dont understand that because it is not only working if I use a HDMI output,same result if I start it with "normal PAL"???
But anything is now wrong with my connection.Both HDL-SVR files wont work and before some time it works for sure!!
HDL-SVR 0.86 did work for maybe 2 seconds if I take a look at netstats,o.90 I cant see and I start before ulaunch to activate the network modules.
So,pls could you make a game install over samba possible to the internal hdd?I dont know if its possible but with that there is no longer need for any other prog.
No more connection is possible and I has one before a while!!!
I test now another gui and it gives out the error message "bad APA file table",so I think its maybe a problem of OPL because I dont change anything since my last properly game installation over the java hdl dump gui 2.2 of Simon Schaaf and hdl-svr 0.90,excluded to install OPL and test the gameplay over my internal hdd!
But both progs,OPL and HDL working fine with my hdd.No error message.....
I dont know wether its good to discuss here over it,its a little bit OT,so I post it also here:
Yes.And netstat show me that the connection is established for a short time but then it break up because this bad APA file table I think!
What is your problem?Another time I get an error message of the server file because my ipconfig.dat is corrupt.That can be happened if you edit the ipconfig.dat with ule and a tab is not correct.
For me that mean the arrow after any line is not at the same text line,its one line under.This make a file difference of 2 byte and the error occurs.I had a copy of the ipconfig.dat on my hdd,restore it and al work fine!
Ok, then you don't have the same problem as me.
What does the following commands output:
(replace 192.168.0.10 by your PS2 IP address of course)Code:
> hdl_dump diag 192.168.0.10
> hdl_dump hdl_toc 192.168.0.10
> hdl_dump toc 192.168.0.10
Sry ,dont know that.
Pls use this thread to post more of your problem,because it has nothing to do with OPL:
I think nomis can help you.He is the author of HDL Dump Helper Gui!
I was trying to help you ...
I have no problem on my side with hdld_srv since the problem I experienced was solved (and I don't use gui).