Open PS2 Loader and mod chips

[savov]

The only other think I can come up with is to turn off the firewall and all antivirus software you may have (one of the reasons I dont use any of this).

[vsub]

I tried that the first time when I tried this app but it was the same...no game list.

Is it possible to be because I start OPS2L using the host of ule and PS2 Client Loader(I tried to start the app before from my USB but it was the same,no game list)?

The only modchip differences that I can think of between my modchip and your is that I can't disable macrovison fix because I don't have menu for that.

[savov]

I dont think macrovision fix has anything to do with your problem. This is how I set up the network with my WinXP pc - From Control Panel choose Network Connections, then "Set up a home or small office network". When the wizard appears click next, next, next, select "This computer connects to the Internet through a re..." (the second radio button). Put a name and discription, then a Workground name. After that select "Turn on file and printer sharing" and continue clicking next till you are done. When finish, configure you network adapters to match the settings you had(network sharing, ips, gws, dns etc), share the PS2SMB folder once again and test the OPNPS2LD (but this time start it from usb mass not host, because this may cause problems).

[Bootlegninja]

I know macrovision isn't your problem. I can disable it on my real matrix and no game will load on open ps2 loader with the chip enabled. I can disable every feature on the chip and the same thing will happen. it's a simple matter of disabling the chip. Its not as complicated as you're making it out to be.

[vsub]

It's not working again(btw when I set a getaway on my PC second card(that is used for my PS2)the internet is not working).

It's not complicated to just open the PS2 and put some switch but in my case it will be pointless because I don't use anything else that requires the modchip to be disabled,and like I said I just wanted to try the app,I have way better and faster method to play games.

[Bootlegninja]

We're going in circles. Precisely why I split your problem from the main thread. Lets start over since we have come full circle on this. What chip do you have?

[vsub]

We're going in circles. Precisely why I split your problem from the main thread. Lets start over since we have come full circle on this. What chip do you have?

Nemesis Pro

[Bootlegninja]

To test with this chip, don't do anything except for hold start during boot. reset after you see the 'disabled' message. macrovision and everything about the chip will be turned off. if not, it's a shitty clone then.

If the loader still won't load games, then it's some a problem with one of the following:

1. bad rips.
2. improper settings within open ps2 loader
3. improper settings on your file share

I HIGHLY suggest using a router as the central device in your setup. it makes things SO MUCH EASIER.

[vsub]

To test with this chip, don't do anything except for hold start during boot. reset after you see the 'disabled' message. macrovision and everything about the chip will be turned off. if not, it's a shitty clone then.

If the loader still won't load games, then it's some a problem with one of the following:

1. bad rips.
2. improper settings within open ps2 loader
3. improper settings on your file share

I HIGHLY suggest using a router as the central device in your setup. it makes things SO MUCH EASIER.

I know that the chip is still working even if I do that(tried that at least 20 times since I have the chip)because when I hold only start and turn on my PS2 and after that see the message "Disabled" and after that restart my PS2 I can:
1.Use Dev. modes.
2.Play backups.
3.USB Advanced is still not working because of macrovision fix.

The chip is turned off only after I boot PS2 game(not homebrew,not PS1 game,not DVD-Video not any kind of disk except PS2 game).

Maybe if I load some PS2 game and after that use IGR it will work but I don't know if IGR also resets the state of the modchip too and will OPS2L work correctly if IGR is still loaded.

[Bootlegninja]

I know that the chip is still working even if I do that(tried that at least 20 times since I have the chip)because when I hold only start and turn on my PS2 and after that see the message "Disabled" and after that restart my PS2 I can:
1.Use Dev. modes.
2.Play backups.
3.USB Advanced is still not working because of macrovision fix.

Then all I can tell you is to remove the chip if you wish to use the program or wait until a solution for why it doesn't work with them is resolved. you can't have your cake and eat it in this situation.

God bless shitty mod chips that don't function like the genuine ones. (for those that don't know, me that was a sarcastic remark.)