Noob trying to get ps2_loader to access network iso

Okay so I'm trying to get my PS2 to load games across the network. But according to my router, the PS2 isn't even connected to the network! I know that it can connect because I tried a network enabled game I had, but when I try to use PS2 loader it doesn't show up in the device list.


Here is what I've done so far:
I installed McBoot with the disk swap trick.
Then I installed open PS2 loader 0.8
I've set up the Windows XP machine with a folder called PS2SMB and placed some PS2 .iso files in there.

Then I ran ps2loader and changed the network files as such:

-PS2-
IP 192.168.1.128 (don't know what to put here)
Mask 255.255.255.0
Gateway 192.168.1.1

-PC-
IP 192.168.1.106 (my windows xp machine)
Port 445
Share PS2SMB
User Guest
Password


and nothing. nothing shows up in the game list.



I'm been following this guide so far:
[How To] Boot Games Off Network (SMB) With Playstation 2 (PS2) Using OpenPS2Loader (A Novice Guide) « Welcome to the Underground.

You need to place the ISO into the correct folder and with the correct naming.
Re-read that part in the OPL-Guides.

The official OPL-Guides are linked on top of EVERY PAGE in this forum!

Quote:

---

I've set up the Windows XP machine with a folder called PS2SMB and placed some PS2 .iso files in there.

---

hiya raptorhunter..........

Go into the PS2SMB Folder and create another Folder called ' DVD '

Put your isos in there and dont forget to share PS2SMB in WinXP


see how you go with that and get back to us with some results


s8n