ISO Mode Doesnt Work USBUtil Does?=SMB CrazyC

[Halo-101]

Hey guys i need some help with OPL Network Config I have crazyc's OPL Rev and Network Settings Setup Like so:

-PS2-
IP : 192.168.10.100
Mask: 255.255.255.0
GateWay: 192.168.10.200

___________________________________________

-PC-
IP : 192.168.10.200
Port : 445
Share : PS2SMB (also tried C$)
User : PS2SMB
Password:

My User Account on the PC Is PS2SMB And Share Folder PS2SMB It seems to connect correct but no game items show up And my pc reads connected
i attempted to ping 192.168.10.100 only to get :

Pinging 192.168.10.100 with 32 bytes of data:

Reply from 192.168.10.100: bytes=32 time<1ms TTL=128
Reply from 192.168.10.100: bytes=32 time<1ms TTL=128
Reply from 192.168.10.100: bytes=32 time<1ms TTL=128
Reply from 192.168.10.100: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.10.100:
Packets: Sent = 4,Recieved = 4,Lost = 0 <0% loss>,
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = oms, Average = 0ms

C:\Documents and settings\PS2SMB>


Upon ipconfig my reply for my connection is:

Ethernet adapter Local Area Connection 2:

Connection specific DNS Suffix . :
IP Address........... : 192.168.10.200
Subnet Mask........... : 255.255.255.0
Default Gateway......... : 192.168.10.100


I have set it up under Internet Protocol (TCP/1P) As:

Use the following IP addrress:

IP address: 192.168.10.200
Subnet mask: 255.255.255.0
Default Gateway:192.168.10.100



Operating System :
Windows XP SP3 September Updates Intergrated.

Use Simple file Sharing -Off.

Permissions:
Everyone:

Full Control:Tick
Change:Tick
Read:Tick

Using ISO Mode .have folder DVD And CD In shared folder with ISO's In These.

Help Would Be Much,Much Appreciated Please!!!.

_________________________________
Halo-101




EDIT:Tried USButil Ripping And The PS2 Can See It ? But ISO Mode Still Not Working!!....AnyHelp Getting ISO Mode To Work? .Thnx

ALERT:Also CrazyC doesnt Have VMC Option? Help.

[RandQalan]

Create an account on windows to what you want
Then change

OPL

User : PS2SMB {username}
Password: {password}

to new account name and password

I use my windows username and password but make sure to give folders permissions the same as user name password more protection.

[Halo-101]

Thnx i got smb working now but not with ISO mode help?

[RandQalan]

Folders [PS2SMB] [DVD] [CD]

Put iso in DVD for dvd's and cd you get the picture

[Halo-101]

I do but there not showing.

They are named eg.Disneys Extreme Skate Adventure.iso

[RandQalan]

Name seems to long need to cut the name.

I think 26 character limit and includes blank spaces

and make sure DVD by right click and check Security settings are allowed for user name and password.

[lee4]

I do but there not showing.

They are named eg.Disneys Extreme Skate Adventure.iso

the file name must start with game's serial id
Ex.
SLUS_206.07.Disney's Extreme Skate Adventure.iso

[RandQalan]

And here is an app that will do this for you

just put into DVD folder then run it

[Halo-101]

Thnx all it works now and thnx RandQalan ur tool made it a lot easier

[RandQalan]

That tool was not made by me forgot who made it but thanks anyway

This is the person who modded for windows

http://psx-scene.com/forums/showpost...postcount=3065 (Open PS2 Loader Project - v0.9)