PS3 brick?

[Devsio]

Hello,

I have a ps3 with tb. And installed the spoofer while the TB usb stick was out. Got my dlc and removed the spoofer. Directly after the spoofer was deinstalled it showed the infamous red screen. Right after that my ps3 turned off. Now when I try to turn it back on again. The lights bright up but the ps3 doesn't show anything on the screen. So is this (semi-) brick? And if so can I fix it?

Thanks in advance.

[BahumatLord]

Turn your ps3 completely off. Press and hold the power button until your ps3 turns on, then back off. Let go of the power button and wait a couple seconds. Press and hold the power button again until a screen shows up asking you to plug in your controller. It takes a few seconds to come up so be patient. Also if you don't understand what one of the options does don't run it. Just run the system update to reflash your console and everything should be working again

[Devsio]

Turn your ps3 completely off. Press and hold the power button until your ps3 turns on, then back off. Let go of the power button and wait a couple seconds. Press and hold the power button again until a screen shows up asking you to plug in your controller. It takes a few seconds to come up so be patient. Also if you don't understand what one of the options does don't run it. Just run the system update to reflash your console and everything should be working again

Bahumat thanks for your respond. Which firmware will it use?

[badboyz80]

Bahumat thanks for your respond. Which firmware will it use?

put 3.55ofw on a usb stick as follows USB ROOT-PS3/UPDATE and put the update file in update folder choose to update through usb then once thats done any 3.55cfw u want