Manual PAL to NTSC conversion?

**Peppers** · 05-23-2009,12:51 PM

I never quie understood how to do this.
Could someone give me some information on the subject?

**Bootlegninja** · 05-23-2009,02:46 PM

you'll need the program: PAL2NTSC w/ y-fix

once you get that, ( I know it's over at sksapps), you'll have to go some trial and error on the y offset. best to use an HDL setup to do that so you don't waste a ton of discs. the program is pretty self explanitory.

**Peppers** · 05-23-2009,07:43 PM

Thanks, I'll just use my modchip to manually select the Y position then once I get it right I'll patch the disk with it. If 48 is default that should be usefull.

Note: There is a reason I need the disk itsself converted. Was hopein this title supported 60hz mode on its own but no luck.

Edit: got it right on the first try.

**Bootlegninja** · 05-24-2009,02:33 AM

hell, since you're using a chip, it's not needed. just burn that stuff and load it. make sure the video output setting is to ntsc and color or auto.

**Peppers** · 05-24-2009,03:06 AM

I know that but as I said there is a reason I needed the disk converted.

User Tag List

Thread: Manual PAL to NTSC conversion?

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!