The above video goes away if you are a member and logged in, so log in now!
Post By indirect76
Mounting HDD and Console ID obtaining
Mounting HDD and Console ID obtaining –
I'm calling to man, who was in time to install this!
Please, look at this. I want someone to mount HDD. And then we possible can obtain console IDs for everyone!
I have no PS3Linux and possible will have no it forever (CECH-3008B code 1D). But i want someone to help me.
It is not necessary to understand everything - just enter the commands).
First, we need to recompile the kernel. I do not know the version the ps3linux's have. Please, enter:
and post it here. After it, i'll searching the according kernel source and .config and next stage is recompiling.
Are you talking about mounting a hard drive to obtain the console id? The console id is not stored on the hard drive.
Oops) I reread this tutorial more carefully and understood that to mount HDD in ps3linux, except kernel recompiling, we also need to load ps3linux NOT from HDD. Why they are calling this tutorial "Mounting HDD on PC"?! There are tools for ps3linux with ps3kernel use ONLY! That's incomplete or even fake.
I'm sorry if i misleading someone. However, one is faultless who does nothing - i just was any way searching for ConsoleID obtaining from PS3-with-OFW.
Moderators, please, remove this foolish thread.
It's not foolish. Lot's of people ask about obtaining the console id from an OFW PS3. Unfortunately the only way to do this is with a hardware flasher. You need to downgrade and install CFW or dump the firmware to get the console id. The firmware is stored on a NAND/NOR chip, not the hard drive.
That's clear. But my goal is without flasher.
I wrote right - it is as foolish as tutorial) And misleading.
Last edited by archicharmer; 06-19-2013 at 10:16 AM.