The above video goes away if you are a member and logged in, so log in now!
Unable to Flash atmega32u2 Chip Using Flip
Unable to Flash atmega32u2 Chip Using Flip –
I had this PS Jailbreak Black Screen with PS3JB? - PS3 NEWS - PlayStation 3 News - PS3 Forums using atmega32u2 chip with a Upgrade button.
I installed the driver for the DFU mode and flip.
I run flip and select target devices as atmega32u2 and open usb port, all works fine, flip recognized the dongle.
i load the hex file and hit the run button on the left side and it keep gives me "blank check fail at 0x0000" .
if i uncheck the blank check, after it program the chip this error msg appear "verify fail at 0x0000".
I tried doing this on a winxp and win7 machine , result is still the same.
anyone knows what is the problem ?
What payload are you trying to flash into that chip?
Originally Posted by fenixkelvin
Have you tried to erase the rom before programming it? (Icon with a pencil eraser on it)?
I had same issue erase first then it should.work
Hi, can anyone help me with this problem ? thanks
I tried erase then program the dongle but the payload apear as Payload V1 in Open Copy Install v1.1 . does this have anything to do with the bootloader ,maybe it is locked ?