rogero 4.30 to rebug downgrade I`m stuck

[homer101]

OK!
I try it and try it and allways same result!
Okey what I do today.
1. Install rebug downgrade to rogero CFW 4.30
2. After that only black screen.
3. Rebuild HDD
4. Black screen again.
5. Replace new HDD and install downgrade again.
6. Playstation again alive. I see XMB and can use it.
7. Old HDD back and format.
8. PS is syillä alive.
9. Recovery mode and install rebug 355.3 (only need 9.99 or higher message)
10. Install rebugtool and chek QA Flack disable.
11. Again install downgrade in recoverymode and then try install rebug 355.3 and again You need 9.99 or higher.
12. Pull out all wiress and put it back last power cabel and recoverymode and same result
13. Format USB pen FAT 32 again and then rebug 355.3 toPS3/UPDATE/
14. Again all wiress unpluck and pluck again message You need 9.99 blaa blaa blaa.

I'm so depressed and dont know what next.
BIG thank to MAYID! I'm still struggle!

[mayid25]

Do you get this error?

(8002F169) DATA CORUPTED when installing from XMB?

Also is your BD diisk broken or not?

[mayid25]

Also when you disabled QA FLAG.

Did you also went to DEBUG SETTINGS IN XMB and TURNED OFF SYSTEM UPDATE DEBUG?

Try this.

And if that doesnt work try to enable QA FLAG and TURN ON SYSTEM UPDATE DEBUG and try to update FROM RECOVERY MODE

[homer101]

Jippii!!!
I`m now in rebug 421.1!!
first I get data corupted message when try intall it from XMB.
Then I do what mayid say above and enable QA FLAG and then turn on system update debug and then recovery mode.
In recovery mode and system update and rebug 355.3 start installing!!

Thanks to million times to mayid25

[mayid25]

Great to hear that it worked. YOUR WELCOME!!!!

An advice for the next time:

When you downgrade from rebug CFW 4.21 or CFW 4.30 rogero and had already QA FLAG enabled (chech also system update debug, if that is enabled) you DONT NEED DOWNGRADER 999.

You can directly install from CFW 4.21 or CFW 4.30, the CFW 3.55.3 REX of rebug no need to use DOWNGRADER 999.

DOWNGRADER 999 IS ONLY NEEDED IF YOU DIDNT ENABLED QA FLAG on CFW 3.55, CFW 3.55.3 or other CFW that let you enable QA FLAG before upgrading.
Because you had QA FLAG enabled when you upgraded to Rogero CFW 4.30 and you went to install downgrader 999 it didnt install correctly. you got a corrupted firmware.
That is why every time you got DATA CORRUTPED ERROR. because your CFW DOWNGRADER 999 was not installed properly because of QA FLAG enabled.

That is why you had to disable QA FLAG and install it properly trought RECOVERY MODE. And after that installing again 3.55.3 then enabling QA flag again so that you can upgrade with safety.

I know what you went through, i had this problem also, it took me 5 hours to resolve this problem.

[worrorfight]

Try doing it again 2nd time.

[illicit]

Do you get this error?

(8002F169) DATA CORUPTED when installing from XMB?

Also is your BD diisk broken or not?

i am getting that message and yes my original bd board is broken/gone. i have a few others but theyre not married. am i screwed?

[fromzero]

I'm having a similar issue, on Rogero 4.30, rebug toolbox saying QA flag not avail, tried 2 flash drives newly formatted and about to try a different hdd...

[fromzero]

OK, IDK WTF is up but the rebug 999 downgrader wouldn't work for me so I tried the 425 to 355 downgrader from bluedisk and used a new hdd. Now it says I'm on 4.21, I have an install package files logo but it wont detect packages and I can't put any apps. When I tried my old hdd it said please install system version 4.40 or later (yes, 4.40) I'm getting flustered.

[mschumacher69]

I'm having a similar issue, on Rogero 4.30, rebug toolbox saying QA flag not avail, tried 2 flash drives newly formatted and about to try a different hdd...

Why are you trying to downgrade Rogero 4.30 first place??