PS3Break V1.1 upgrade problem please any help
Just upgrade my ps3break v1.1 from whatever version it was to a hermes v4 along with running obm v1.61 and tried obm v1.71
At first i accidently flashed the v1.1 with the v1.2 hex file, realised what i had done then went back re-installed software to update and re-flashed the v1.1 to it's right firmware through the official ps3break website.
When i use the ps3break along with either obm v1.61 or v1.71 it selects games fine but it's when its loading up or installing game data to hard drive theres a constant line running all the left hand side of the TV maybe about 2cm width, looks like a glitch in the video as the games run perfectly but theres pixels on the screen and looks corrupted or something. Any ideas???
I've tried re-flashing stick and trying different obm but nothing to get rid of this crap on the screen. Would appreciate anyones wisdom into this, thanks in advance.:)
also tried the ps3 without the ps3break with metal gear solid 4 and it loads up fine so my guess is its an issue with the ps3break not the ps3 hardware