Open Backup Manager-- Oh Hex!
I want to try the new Open Backup manager with patch support for problem games such as SFIV and f1-10... but i will need to update my board's firmware (PSGroove variant) to enble "peek/poke" commands that are required....... but--->
What HEX should i update with?
I asked the ebay seller what too look out for when i need to update, and this is the info given,...
"The board runs psgroopic hex files compiled for a pic18f4550 or 18f2550 with a bootloader with an offset of 0x800"
To my "non tech" self, that sounds like greek to me......
can anyone point me in the direction of the correct hex to flash my board with?
Be careful Which hex file you get!!
I reckon we must have bought off the same guy, I got this the other day when asking about it
"you need psgroopic which is compiled for a 4550 or 2550 pic with a bootloader with an offset of 0x800"
asked some more and got this!
"You need a hex for a pic18f4550 or 18f2550 - it needs to be compiled for the MCHPUSB bootloader"
Just to warn you incase you dont know,if you put wrong hex on to this PIC there is no way to put another one on without a PIC programmer,Im being very careful as I dont want to have to buy another or learn about PIC programmers! I also have minimus board so not so bad for me but if this PIC was my only jailbreak device I wouldnt be so quick to try other Hex files.I read on an other site about someone basically bricking thier dongle due to incorrect hex with wrong bootloader or no bootloader, It will still work but It wont be upgradeable after that.I want a updated hex for this too so if you have any luck and its still upgradeable afterwards let me know here, thanks