The above video goes away if you are a member and logged in, so log in now!
ok i need help or opinions ect.
ok i need help or opinions ect. –
i read a lot of forums so far but im tired as hell
so can anyone answer this
i jail broke with geohotts cfw but it wont play the back ups i was told to switch
to Waninkoko but i dont know how and i dont want to do anything dumb to mess up my system so if anyone can tell me what or how to do it steps to follow
or tell me what thread to read let me know i have a 60 gb fat backwards compatible
just asking for some good advice thank you in advance
btw anyone in here from MI downriver? or? let me know
Last edited by xtudox; 01-23-2011 at 01:30 PM.
DONT GO TO WANIN
GO TO WUTANGRZA + geohot + kmeaw supported BM
First things first revert to 3.55 OFW first before going to another CFW or it could result in a brick. I also suggest doing this via the recovery menu not the XMB. Make sure you backup your dev_flash 1-3 just in case and do a backup from the HDD utility on the XMB as well for good measure. Also make sure you format your flash drive before trying to install any FW from flash media as it can become fragmented and cause data corruption and a bad flash aka RSOD or Bricked.
All you need to know/download after that can be found
http://psx-scene.com/forums/f118/lis...ew-apps-75092/ (List of Signed Homebrew Apps)
And finally here
This needs to be ran first before Multiman upon first run but isn't needed after that. Gaia doesn't need the above file at all from what I am told but i use a manager that doesn't have lvl2 integrated so I run that file before my manager. I like this method as it allows me to choose what payload I want to run and not one that is forced upon me by the manager. I just like flexibility and this gives me more but involves one tiny extra step to boot a backup. Been stuck on FBANext for a week now so I haven't even used it
Here are your MD5's to ensure you have proper updates. And people stop doing the Wutang/Geo CFW and doing Kmeaw as well. You are causing your own stability problems. They are two totally different CFW's Either just install Kmeaw ater being on OFW 3.55 OR Wutangrza then Geo Hot after that. Not Wutangrza then Geohot then Kmeaw!! This has been causing problems for users and resulting in errors from the end user not the devs but everyone is quick to point a finger at someone else even when it is their own fault they did not research properly before trying to go bleeding edge on technology. Kmeaw allows for 3.41 pkg's and 3.55 pkg's upon initial install and can use unsigned files. Now the reason you have to add Geohot over Wu Tangrza is the fact that it doesn't have install app enabled and relies upon Geohot's work for this, it will only install signed PKG's for 3.55. Both have flukes peek and poke intergrated one is an AIO solution that also allows for unsigned files and the other needs a little help from an outside source and only "legit" 3.55 files will work. Guess it is stil better than 3.15 users stuck with EvilNAT CFW that has no peek and poke but it can install PKG files to allow games to be ran from the XMB.
OFW 3.55 Sony md5: ca595ad9f3af8f1491d9c9b6921a8c61
CFW 3.55 Kmeaw md5: 2be5e87a22bf1e7f48e98fcabd38977b
CFW 3.55 Wutangrza md5: 05933BB7A89BEE87B0AA45C74F980E81
CFW 3.55 Geohot md5: 6EAB7F1DEEA1ED46A1DC9924FD7080B3
CFW 3.55 Waninkoko md5: 6EAB7F1DEEA1ED46A1DC9924FD7080B3
I have tested and had successful install with each pup that has these exact md5's.
Last edited by atreyu187; 01-23-2011 at 04:18 AM.
PS3 CECH-2501A [CFW] & CECH-3001 [OFW]/ PS2 SCPH-3901 & SCPH-7501/ PS1 SCPH-5501
Mod Cobra 4.46 v7.00 w/ E3 Flasher [CFW] & Cobra ODE 4.50 [OFW]/ Mod HDD-OSD [Phat] & Modbo 4.0 [Slim]/ Mod MM3
HDD 1tb [CFW] & 640gb [OFW]/ HDD 640gb & OPL v0.92 w/ 1.5tb SMB
LINK TO DOWNLOAD THE FILES BELOW
Originally Posted by xtudox
#1. Create on the root of a USB (formatted FAT 32) the following folders: \PS3\UPDATE\
#2. reinstall OFW (3.55) from recovery mode then jump to step
#3. Now you're on Official 3.55 firmware its time to install the kmeaw custom firmware.
#4. Rename the PUP inside CFW 3.55 Folder (CFWkmeaw.PUP) to PS3UPDAT.PUP
Then put the renamed PUP into the same folder you just create inside your USB‚ example:
\PS3\UPDATE\PS3UPDAT.PUP (if asked to overwrite say YES)
#5. Go to Settings > System Update > Update via Storage Media and install the kmeaw Custom Firmware
note - if a message appear saying you already got the latest version turn the PS3 on Recovery Mode and choose System Update from the menu
#6. After reboot you should see the install package file and the app_home/PS3_GAME/ inside the Game Folder
#7. Add the package MultiMan
#8. Load game from external or internal and enjoy.
i take no credit
PS3 Fat 160gb
Don´t go for anyone at this moment. Just wait one more week.
ok i think i might wait till February getting my financial aid check thinking of putting in a tb in the internal or using a external
thank you man much appreciated
Originally Posted by ImPS3
thank you for the help much appreciated but question so you recommend to install those specific in that order over each other to complement there flaws is that safe or will it cause it to brick i was told it could brick but forgive me if im asking a dumbass question
Originally Posted by atreyu187
jus making sure