My PS3 won't boot .. Please Help me

[Nody Moha]

Hi

I was on REBUG 3.55.2

after that i update it to ROGERO 4.30 V2 without going to 3.55 OFW

and i missed MultiMAN

then I start to downgrade it with (4.25to3.55 CFW)

after PS3 reboot

became a blank screen

-----------------------------------

I Try with Dongle to enter Service Factory Mode. but nothing happen


what can I do to fix it

hard disk lamp (that lamp next to the USB) light up for a quarter of a second when I press power button

[Tamrat]

I am on Rogero 4.30 and there is multiMAN. It works. I don't know why you said "I missed multiMAN"!

I am not sure but will a 4.25to3.55 downgrader work dor 4.30? You kinda messed it up right there.

Try and enter recovery mode in the normal way (hold power button till PS3 turns on and turna off and again press and hold until you hear three consecutive beeps).

[Nody Moha]

I am on Rogero 4.30 and there is multiMAN. It works. I don't know why you said "I missed multiMAN"!

I am not sure but will a 4.25to3.55 downgrader work dor 4.30? You kinda messed it up right there.

Try and enter recovery mode in the normal way (hold power button till PS3 turns on and turna off and again press and hold until you hear three consecutive beeps).

I said "I missed multiMAN". I mean: I didn't install the correct version of it

4.25to3.55 downgrader. I think it should work. because it worked on Rogero 4.30 V1.04 CFW and Kmeaw 4.30 CFW

I tried to enter to Recovery Mode in different way. but none of them work for me.

[Tamrat]

What video connection are you using? Recovery mode will not work with HDMI for me. Thats obvious since you will do a video output reset when trying to enter recovery mode. This things are easy to forget.

Sorry if this is a noob/cheap answer

[deviljin102]

Hi

I was on REBUG 3.55.2

after that i update it to ROGERO 4.30 V2 without going to 3.55 OFW

and i missed MultiMAN

then I start to downgrade it with (4.25to3.55 CFW)

after PS3 reboot

became a blank screen

-----------------------------------

I Try with Dongle to enter Service Factory Mode. but nothing happen


what can I do to fix it

hard disk lamp (that lamp next to the USB) light up for a quarter of a second when I press power button

The downgrader works on 4.30v2, since I had to redo it myself this morning since I accidentally deleted a file from flashfxp and I lost multiman.

If you have a blank screen, try hooking up the system with the composite cables, maybe your hdmi port has stopped working? I did have a similar issue with the hdmi port malfunctioning.

[jayfunk]

Hi

I was on REBUG 3.55.2

after that i update it to ROGERO 4.30 V2 without going to 3.55 OFW

and i missed MultiMAN

then I start to downgrade it with (4.25to3.55 CFW)

after PS3 reboot

became a blank screen

-----------------------------------

I Try with Dongle to enter Service Factory Mode. but nothing happen


what can I do to fix it

hard disk lamp (that lamp next to the USB) light up for a quarter of a second when I press power button

I think you skipped the part where you need to do Qa flag.
Now your console is bricked.
If you have a valid dump then you can recover it.
Or else u can throw your ps3 away or sell the parts..
Thus im not 100% sure of this but it looks like it.
Maybe you can still get a valid dump out of your nor chip if you buy a e3 flasher.

Good luck

[Nody Moha]

I Tried with Composite cable And HDMI together. but nothing on screen

[jayfunk]

I Tried with Composite cable And HDMI together. but nothing on screen

Your ps3 is bricked!!!

[Tamrat]

its bricked obviously. but thats not the end of the world right! You can try get yourself a hardware flasher and try to fix it using the numerous tutorials available. But they need a NOR/NAND dump first. I dont know if there is another way around or if other console's (similar model's) NOR/NAND dump will work for you.

[Nody Moha]

This is video for this problem
www(dot)youtube(dot)com(slash)watch?v=SaFn5_-xiUo

sorry... Can't put link

-------------------------------------
I don't have NOR/NAND dump and any hardware flasher

If I Bought one (hardware flasher) can I Fix it or not?