kmeaw's 3.55 CFW red screen of death

[time²die]

[lang=de]Model: FAT 60GB CECHC04

Ich habe wie beschrieben erst die OFW 3.55 Installiert.
Danach dann die kmeaw's 3.55 CFW mit der MD5 "2be5e87a22bf1e7f48e98fcabd38977b".

Während der Installation kam dann red screen of death...

Was kann ich jetzt noch tun?[/lang]

[lobomau]

I'm sorry yo tell you but you probably bricked your ps3 with a wrong pup file.

Kmeaw md5 is NOT the one you posted but:

MD5: 05933bb7a89bee87b0aa45c74f980e81
SHA1: 3d51501014ab46131a539e1664476e10fa9b611e

(just check OP on the original post (Wutangrza CFW using Flukes1 tools))

Since it doesn't match yours, I guess you either got a bad copy, or if you made it yourself with bsdiff, something went terribly wrong.

Can you reboot your PS3 into recovery mode?
If not, try service mode with a dongle and just put your old fw back.

[time²die]

[lang=de]Hi, in meiner readme.txt seht

Disclaimer: This package is for demonstration use only, or for running your own made software (homebrew).  We do noit condone piracy and are not responsible of the small chance you may brick.

Original FW PUP md5 before patching: ca595ad9f3af8f1491d9c9b6921a8c61
Patched PUP md5 after patching:      2be5e87a22bf1e7f48e98fcabd38977b

If you are on Wutangrza+geohot fw, you dont need to flash the new firmware, just install the package, and run it every time the ps3 boots before running apps that need PL3.
Otherwise, it is suggested that you upgrade to 3.55, Upgrade to this patched PUP, then install the lv2.pkg.

This is only until apps are updated to include this patch themselves, as then you wont need to run the patcher on every boot.

For Stock ps3's

1. update to official 3.55
2. bspatch PS3UPDAT.PUP PS3CFW.PUP patchfile
3. Delete PS3UPDAT.PUP
4. Rename PS3CFW.PUP to PS3UPDAT.PUP and that's it! You're ready to install
5. Install lvl2.pkg
6. Launch backups with manager

Ich kann rebooten aber ich bekomme dann immer als erstes den Update Bildschirm mit kreis zurück und dann kommt gleich der red screen.

Wie soll ich das machen?

Ich kann mit dem Controller nichts bedienen. [/lang]

[FiShBuRn]

I'm sorry yo tell you but you probably bricked your ps3 with a wrong pup file.

Kmeaw md5 is NOT the one you posted but:

MD5: 05933bb7a89bee87b0aa45c74f980e81
SHA1: 3d51501014ab46131a539e1664476e10fa9b611e
...

Your information is wrong, thats md5 of wutangrza cfw not Kmeaw. The md5 of Kmeaw is correct....dunno why he got a brick...

regards

[BaXT3R]

[lang=fr]+1 son MD5 est correct

premier brick avec ce cfw...[/lang]

[time²die]

[lang=de]Ich hab die Datei hier geladen:

kmeaw's 3.55 Custom Firmware Package[/lang]

[MikkelManDK]

seriously germans, learn english like the rest of the world or at least do this:

User CP -> Edit Your Details ->

Default language
In which language you will be writing your posts. Forum will automatically translate your posts to others users languages. Also it will translate posts in other languages to your default language.
Select your default language:

[BaXT3R]

[lang=fr]lol MikkelManDK

c'est vrai que l'on comprends rien
surtout allemand est dur ..[/lang]

[time²die]

[lang=de]Die Probleme mit dem übersetzen kamen bei mir nur durch den eingefügten [Code] block, den Text aus der readme.txt.

Hab es jetzt korrigiert. Sorry...[/lang]

[zelgadiszero]

seriously germans, learn english like the rest of the world or at least do this:

User CP -> Edit Your Details ->

Seriously MikkelManDK calm down!

if one german is not able to write his post in english, that doesnt mean this applies to all germans.