The above video goes away if you are a member and logged in, so log in now!
Post By Ichijoe
Jailbreak help –
can someoen make a video step by step how to jailbreak how install multiman and all about the ps3
i have 4.25 just saying thanks for any help
There are already plenty of HOWTOs on YouTube, just go and search for them.
Something you might need to know are Phats (with exception to the last few?!) all pretty much have a Dual NAND Chip in them that you WILL have to solder a Chip to... According to this Site you best shot is with the Teensy++ 2.0. Although I guess you could also solder a ProgSkeet or even an E3 Flasher w/the E3 Linker (Solder Board).
Only the CECH -- 20xx, 21xx & 251x Slims can be blindly downgraded. The 25xx HAS TO BE CHECKED! As not every 25xx can be downgraded. The 30xx (Slim) and 40xx (Super Slim) are just SOL right now. As you can NOT downgrade those Systems yet
So before you even get your Panties in a bunch you need to check some things...
PS3 Model Phat (NAND/NOR) Slim, (NOR) again the CECH-25xx Models need to be checked to see if it can be downgraded, as I suspect that the greater majority of 25xx's are not.
If you have a Slim (NOR) search for E3, if you have a Phat (NAND) try ProgSkeet or Teensy++.
To my knowledge there are no solderless NAND Clip Kits available. Considering that E3 promised a NAND Chip solution and never delivered it, is telling.
The One thing I'm sure you might have already found on YouTube are, those Videos promising a quick simple way to install CFW with out some kind of Hardware (i.e. E3, ProgSkeet or Teensy++), THEY ARE ALL SCAMS! If such a method existed you'd have seen more posts about it here, and everywhere else. The only "Softmod" to CFW is from OFW3.55. Assuming that you were somehow still on OFW3.55. Which you are not, and therefore can't.
So you need to know how to pick your Poison first. Then you can filter that into which ever Howto you then need.