The above video goes away if you are a member and logged in, so log in now!
Help with "Unknown USB Device" error when using PSGroove + TI-84 plus
Help with "Unknown USB Device" error when using PSGroove + TI-84 plus –
Ok so I finally got my TI-84 and I was able to enable the jailbreak exploit on my ps3 the first time i tried it.. I was incredibly happy, I backed up and played for hours!
Next day I turn the ps3 on and it will not boot jailbreak... when I hit power it turns on but when I hit the eject button nothing happens, no sound, disk does not pop out, ect. I tried at least 10 times and no succes
So I stayed calm and decided to re-install 3.41, after that, the exploit loaded right away after my first try..
sooo.. Today I try to run the exploit and I am having the same problem, so I reinstalled 3.41 but it still will not boot..
Does PSGroove on TI-84 only work when it wants to?? is there any way to fix this problem? any help would be greatly appretiated
Common guys! Help a brotha out!
I know someone has had this problem...
basically after u power on, with jailbreak the eject button does not work,beep, or do anything.. only after the ps3 has booted into xmb then it returns to normal..
do you power off from the back of PS3 before you do the process ?
You have to do a hard reboot. Take the plug out from the wall if you are on the Slim or flick the switch at the back on the Fat one.
of course i do the hard reboot...
I know how to run it... I followed the tutotial on this site many times... and have sucesfully loaded it
but the problem is that the eject button does not function sometimes when I start up the ps3, but after it boots to XMB then its starts working like normal... i swear its the wierdest thing
well then maybe its Eject button issue .
you could also try Restore Default Setting .not about this one .
Make sure there are no other devices plugged in via usb. No external drive or controller. Once the exploited boot has completed, you may plug those in.
ok guys never mind... I got angry so I hit the console a couple of times and the eject button fell into place and started working again...
I guess it's just loose.. sometimes the caveman approach pays off! lol
thats for the help... is the eject button easy to replace?
i think you have to replace the PCB of the PS3 Power & Eject Button Board.
is the eject button easy to replace?