Printable View
I installed the 3.56 spoofer and ran it. I pressed X and when it was done I turned of the PS3 and then turned it back on. Now when I start the PS3 it won't boot anything. It just has a solid green light and nothing on the screen. I can still go into the recovery menu. Can anyone help?
Did you get the spoofer from the rebug.me website>
No, I got it from Redmond Pie.Quote:
Originally Posted by master737373
Did you run lv2patcher? And tell me EXACTLY what you did when you installed this.Quote:
Originally Posted by ps3gamer2145
hold down the power button until it beeps,this will reset your display mode
I downloaded the spoofer, put it on a flash drive, installed it, and then ran it. After that I pressed X and when it said finished you may now reboot. I held down the power button until it turned off. I turned it back on and now its not doing anything.Quote:
Originally Posted by master737373
No, I didn't run the lvl2patcher. I thought it wasn't necessary for kmeaw. Could this be the problem?
Turn on the PS3. When you see the green light, press and hold the power button until it beeps once. Keep holding it until it beeps twice. Then try to turn the PS3 on then. If that doesn't work, go into the recovery menu and pick restore default settings. If that doesn't fix the problem, and you dont mind losing you psn info, pick the option towards the bottom, it starts with a "d", i can't remember exactly. if that works and you have a backup of your xregistry.sys, then you can restore you psn info.Quote:
Originally Posted by ps3gamer2145
Go into the recovery menu, and install kmeaw's 3.55 cfw. Apparently, some people have success with that.
Sorry for the multiple posts, but if you did this on any firmware beside 3.55, then you WILL get a black screen. This MUST be done on 3.55
I got it to boot, but how should I reinstall it?