Flashed Waninkoko's CFW? Report in!

I guess a thread with confirmations would be very helpfull.


Just post your model (PHAT/SLIM, Region, from which FW you updated) and if the cfw works or if it bricked your ps3.

Add a poll :).

It should work for everyone if Waninkoko didn't specify which PS3s it will work with, although I've read in one of the threads that there are reports of Slims bricking (possibly 3.42 and up factory ones?). Just read a guy with an MGS4 fat PS3 has bricked.

Quote:

---

Originally Posted by Samba112

seems I might have bricked my old 80GB MGS PS3... :mad: using this CFW

---

Quote:

---

Originally Posted by Snifi

waninkoko via twitter:

"I recommend updating first to OFW 3.55, then to CFW 3.55. I'm sorry for all the consoles that have died, this was unexpected :S"

---

Quote:

---

Originally Posted by Samba112

I posted earlier my md5: 6EAB7F1DEEA1ED46A1DC9924FD7080B3

and i had restored to Sony ORIG 3.55 before trying this pos...
seem I cant get into recovery mode now

---

Too many possibilities

FW 3.15, 3.21, 3.41, 3.42, 3.50, 3.55, CFWGEO 3.55, Downgraded FW to 3.41, SLIM, PHAT, PAL, NTSC....

Ok so by now I'm sure you've all heard about the bricks caused by Waninkoko's CFW. What we should do is get as much information as we can about the consoles being bricked and the consoles that have had success. I propose the following format:

Success?: Yes/No
Model:
Date of MFR (if available)
Region (of console):
FW before isntall:
Other notes:

Example -

Success?: No
Model: Slim 250Gb
Region: EU / UK / PAL
FW before install: 3.55 Geohot
Other notes: Never Downgraded

(note: The example was made up)

Please keep other posts to a minimum, this is just a fact-finding mission.

EDIT: OK! So it would appear that the firmware ALWAYS bricks a 256Mb NAND PS3 and "sometimes" bricks a 16Mb one. It's all irrelevant now as there are better, safer firmwares out there. The moral? DON'T FLASH WANINKOKO'S FIRMWARE!

Success?: Yes
Model:C3CHH04
Region (of console): EU
FW before isntall:3.41
Other notes: installed directly patched 3.55 wanikoko

Success?: Yes
Model: CHECH-2504b
Date of MFR: N/A
Region: PAL
FW Before Install: Flukes Peek & Poke & Geohot 3.55
Other Nothes:
Installed straight thru XMB no recovery mode

Success?: Yes/No
Model: CECHExx
Region: US
FW before install: 3.55
Notes: Was on Geohots 3.55, but installed a clean OFW 3.55 first.

I've installed Waninkoko's firmware in recovery mode, but I can no longer install any packages. I get an error. (80029564)

Success?: Yes
Model: CECHL04 (Fat PS3 80GB)
Region (of console): EU
FW before isntall: 3.55 geohot cfw
Other notes:

Did a fresh install from Geohot cfw to offical 3.55 fw in recovery menu. then i installed Waninkoko's CFW in recovery menu and working fine. People with problem installing pkg's install the unsigned ones the ones for 3.41 working fine..

Success?: Yes
Model: SLIM CECH-2502A
Date of MFR (if available)
Region (of console):au
FW before isntall: 3.55OFW
Other notes: New PS3 that came with 3.50 FW already installed. Had not upgraded to Geohots FW so had only been on OFW 3.50 and 3.55.

Success?: Yes
Model: Dunno. Slim with 3.50 - Was updated to 3.55 before i ran CFW
Region (of console): PAL
FW before isntall: 3.55
Other notes: Did the normal way, not recovery.

Could brick be caused by the region of the machines?