E3 downgrade Bricked
Hello, everyone ( my ps3 is slim 120gb it can downgrade to OFW 3.55)
my ps3 bricked because I do 4 switch up and switch 1, 2,3,5,6,down. then my ps3 get black screen but still have green light. then I read on Wiki I know that my ps3 is Blackscreen with no hdd activity and only hard reset possible.
I did try these methods : remove clip and try again, try getting into FSM with a faster power/eject combo, attempt flashfun downgrade. But no success
I also did solder tristate to SBE and get back up FO is 23.79% and FFh is 12.78 and in the middle is below 0.5. I think it is valid but when I put it PS3 Nor and Nand Auto Patcher v0.05. they said it is bad file detected.
now my ps3 is blackscreen but no image, also no usb receive in port.
can anyone please help me fix my ps3. thank.
Checking just statistics does not make the dump valid. You need to manually check it too before even attempting to patch.
As you pointed out you set the switches wrong on E3 flasher. When making a dump of your flash only switch 3 needs to be up all other switches down.
When you eventually flash back patched dump then all switches are down. I'm surprised you got any dump at all never mind bad dump
This link will help you in the downgrade procedure from now on bud. Before you try anything read and read again
To check statistics should be as follows
1 - Statistics analysis
1.1 - Open your bkps3.bin in HxD
1.2 - select analysis > statistics > select your file
1.3 - mouse over the blue bars and check if:
00's - between 18.71% - 29.01%
FF's - between 10.42% - 10.48%
rest - Below 0.5%
Looks like your statistics FF's are way off