Blank ps3 jailbreak devices at devilery

[ecircuit]

Hello there,
does somebody know a well supported ps3 jailbreak device, which 100% blank at deliver without any payload on it? I have to flash it on my own, so at least the device should contain a bootloader or another function to flash it.

Would be very important to me because in my country the costums is cooperating with Sony and they can fine you up to a few thousands Euro if you are on bad luck.

Thank you for every information.
Ecircuit.

[nicval]

minimususb or teensy
theese two are dev board and comes blank and hex files are easy to find

[mary1988]

Hello there,
does somebody know a well supported ps3 jailbreak device, which 100% blank at deliver without any payload on it? I have to flash it on my own, so at least the device should contain a bootloader or another function to flash it.

Would be very important to me because in my country the costums is cooperating with Sony and they can fine you up to a few thousands Euro if you are on bad luck.

Thank you for every information.
Ecircuit.

ps3 break?If you want to buy, Ndscardsale:Top Nintendo DS Lite, Best NDS Lite, NDSL, DS Lite Console and DSi Nintendo Cards Online is a good choice, you can see, I wish you good luck

[ps3fan1234]

yeah go with ps3 break its awesome but i would recommend p3go since you can flash any hex into it mine will be arriving soon can't wait.

[bitsbubba]

yes the P3Go is awesome had one my second came today, but he wants no name on it. If it helps when I ordered my P3Go from DSCartshop, they sent it with the packaging reading contents only as 'Card Reader'

[atreyu187]

P3 go is not blank,ps3usbjailbreak isn't either. Most of the commercial dongles claim they are blank but I have.yet to find one as everyone I have gotten has had hermes payload installed. If you want a 100% blank item you need a dev board like a teensy or udip etc or the likes heck even the eclips3 wasn't blank as advertised so to be safe buy a dev board that wasn't made with just ps3 jailbreaking in mind.

[Onyxblack]

taken from
PS3-Hacks.com / List of All Devices That Can Jailbreak A PS3 *UPDATED 10/6/10*

DIY (Do It Yourself) Chips Which Can Be Programmed For Jailbreak :
AT90USBKEY2, ATAVRXPLAIN board, D2PROG tool for Wii D2PRO modchip, AT90USB1287, AT90S8515, MinimusUSB AVR USB dev unit, BlackCat USB Flash Memory Programer, Teensy++ / Teensy 2.0, Microingenia 18F2550 trainer, Microingenia BEEPIC 18F2550, Sparkfun USB Bit Whacker -18F2553 Dev Board, Sparkfun USB Bit Whacker - 18F2553 PTH Kit, Tronix 2550 Dev Board V2 and V3, Olimex PIC-USB-4550 (PIC-P28-USB and PIC-P40-USB *should* also work) :

I myself have chosen to use ATAvrXPLAIN (aka xplain) - its a fairly popular board and fairly priced.

[jeremyc9]

If your country is cooperating with Sony I'd probably stay away from anything that has any combination P, S, or 3 in it's name and go with a dev board which has been recommended; I personally bought a teensy 2.0 and it works great.

[ecircuit]

Thank you very much guys!

I will go with a teensy 2.0 or a minimus usb dev board. Thank you very much for your help and the good community!


Greets,
ecircuit.

[Biohead]

P3 go is not blank,ps3usbjailbreak isn't either. Most of the commercial dongles claim they are blank but I have.yet to find one as everyone I have gotten has had hermes payload installed.

Just letting you know my PS3USBjailbreak was supplied blank. Tested it as soon as I got mine.

Although it does have the logo on the case so not what you're after I understand.