AT90USB162 Help Needed
I have recently bought a at90usb162 and it came with hermes v3 but now id like to update the device to hermes v4b. I know how flip works and everything but im not sure which hex file i should use :( .All i know about the stick is a at90usb162 running at 16 mhz, and underneath it say AVR. I have provided a picture so maybe someone can help me out :D :D
Hopefully someone can help me out
AT90USB162 is the same as a Teensy 1.0/maximus/minimus AVR USB.
Can you post the picture as I can't see any pics anywhere. I should be able to advise you further from there.
The hermes v4 are all here
You can try for at90usb162
They all should work (cannot guarantee led functioning properly without knowing the board you actually own)
i have atmega32u2 and it works with payloads for at90usb162. it's supposed to be teensy 1.0 compatible (not to confuse with teensy++ 1.0).
afaik these are inluded by default in hermes' packages.
FYI he's PM'd me the images of the stick and this is the one he's using:
That's from ebay, the other image (Taken of his) looks the same as the stick without any casing except there doesn't seem to be any plastic covering the jumper pins at the bottom of the board.
thanks for posting the pic
Im not sure i guess its a one of a kind board
Just tried installing v4 with flip but for some reason i get a error on usb..i think i need to try it on some other windows computer
I have a 'one of a kind' board too, it took me a while to find a working hex for it.
Figured it out today :D...for some reason when the usb stick is plugged in normal it wont detect it, but if it was just slightly pulled up with a finger then for some reason it would detect the at90usb162 in dfu mode. Weird....:crazy:......
Anyways I'm running v4b now, thanks guys for your help, btw this is the best ps3 fourm :)