3.41 Debug Firmware on retail unit, *Not Working*

[GFK]

I was currious now that I had the downgrade hex for my teensy++ 2.0 what would happen if I swapped the firmware for the leaked 3.41 Debug firmware.

This is what I got [ame=http://www.youtube.com/watch?v=ZwVSuxWa-g4]YouTube - PS3 3.41 Debug Firmware on Retail unit *NOT WORKING*[/ame] I got the retail 3.41 back on it. so I can still use me ps3 ^^ but now you guys don't have to try it . Update log is attached.

[garyopa]

That was already tried with the E3 Card Reader.

But thanks for trying again!

v2.15 debug works.

There was reports also that Slims could not go lower then v3.41 using the E3 Card Reader, but phat machines could go all the way down to that v2.15 debug.

[GFK]

oh xD I only knew they tried 2.15 not 3.41 my bad but still it was fun trying ^^

[szlifier]

Downgrader as an Unbricker?

[GFK]

I used the hex file the PS3Yes team released today.

[Pyong]

I was currious now that I had the downgrade hex for my teensy++ 2.0 what would happen if I swapped the firmware for the leaked 3.41 Debug firmware.

This is what I got YouTube - PS3 3.41 Debug Firmware on Retail unit *NOT WORKING* I got the retail 3.41 back on it. so I can still use me ps3 ^^ but now you guys don't have to try it . Update log is attached.

How did you repair it?
e:nvm, does 2.15 work on non-bc 80gb?

[Ben Jeremy]

That was already tried with the E3 Card Reader.

But thanks for trying again!

v2.15 debug works.

There was reports also that Slims could not go lower then v3.41 using the E3 Card Reader, but phat machines could go all the way down to that v2.15 debug.

Mark Webber got 3.41 debug firmware working on a RETAIL console. (I originally reported this as kiosk)

http://psx-scene.com/forums/f181/kio...-readme-72507/

It would be interesting to have somebody check one out for full functionality... just the ability to flash retail firmware on a retail unit should be front page news.