[langtitle=nl]CECH-2504A downgrade werkt niet , zit vast in fatory mode!!![/langtitle]

[darky2003]

[lang=nl]gisteren kocht ik een slim CECH-2504A ps3,
ik graak in de factory mode maar wanneer ik self 2 file op usb stick plaats leest mijn ps3 deze niet.

Ook het update bestand leest ie niet.
Nu zit ik vast in 3.50 factory mode!!!!

Als ik update naar 3.55 ben ik uit factory mode?
Iemand idee waarom ik niet kan downgraden???


THX

ik ben uit de factory mode gegraakt,
usb was niet als fat32 geformatteerd.
Als ik nu wil downgraden doet de ps3 niets,
op de usb staat dan deze log:[/lang]
manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
creating system regions done.
boot from nor flash...
creating nor flash regions...
create storage region: (region id = 2)
create storage region: (region id = 3)
creating flash regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
Initializing
taking a while...
start Updating Proccess
Initialize elapsed time = 54 msec
check UPL
Check UPL elapsed time = 68 msec
check Package Size
get package size elapsed time = 16 msec
start Updating Package
Update packages num = 30
Update packages total size = 162260220
Update Package Revoke list
read package revoke list package (576 bytes) elapsed = 19 msec
update package revoke list elapsed = 184 msec
Update Package Revoke list done(0x8002f000)
Update Core OS Package
read core os package (5182047 bytes) elapsed = 225 msec
update core os package elapsed = 263 msec
Update Core OS Package done(0x8002f14b)
update package elapsed time = 692 msec
Updating or Verifying failure 0x8002f14b
UpMng.UpdatePackage() failure
manufacturing updating FAILURE(0x8002f14b)
Total Elapsed time = 14801 msec

any idea???

[[C*]]

CECH-2504A downgrade does not work, stuck in a fashion fatory!

And somewhere else there is a Ralph Lauren sweater stuck in an electronics factory and unable to dye to last seasons totally still in colour!

I believe your model is undowngradable. Just wait for signed unofficial .PUPs, .PKGS and EBOOT.BINs to appear

[flo]

Could he update back to official 3.50 by going to service mode and updating from there with the PS3/UPDATE/PS3UPDAT.PUP method ?

[[C*]]

Could he update back to official 3.50 by going to service mode and updating from there with the PS3/UPDATE/PS3UPDAT.PUP method ?

All he has to do is put the 2nd .self on his USB and boot the PS3. It should exit service mode that way. Otherwise he can flash the 3.50 .PUP using the downgrade method.

[darky2003]

i was already able to get out of factory mode by putting self 2 on usb.
But then my ps3 was not bootable anymore and i had to connect my controller and put the official 3.50 update to usb and then go back to 3.50.

Now im still on 3.50, also tried to downgrade to 3.15 debug but my ps3 hdd just doesn't read a thing from my memorystick.

[[C*]]

i was already able to get out of factory mode by putting self 2 on usb.
But then my ps3 was not bootable anymore and i had to connect my controller and put the official 3.50 update to usb and then go back to 3.50.

Now im still on 3.50, also tried to downgrade to 3.15 debug but my ps3 hdd just doesn't read a thing from my memorystick.

Didn't you read my first post? Your PS3 is not downgradeable. Just wait for the unofficial signed homebrew to come along in the next few months.

[darky2003]

oke thx

[flo]

Few months ? How soon do you think we can tell the dongles goodbye ?

Bad news for chinese companies in 2011 they won't be profitting from dongles anymore

[Saner]

Few months ? How soon do you think we can tell the dongles goodbye ?

Bad news for chinese companies in 2011 they won't be profitting from dongles anymore

It would surprise me if it took a few months.

However I have been surprised by a lot of things recently, so who knows.

[KoOlKiDsKluB]

It would surprise me if it took a few months.

However I have been surprised by a lot of things recently, so who knows.

Fail0verflow has said that they "will release the tools in January or so" so I don't think that we will have to wait a few months. Heres a guy asking the question Twitter and here's Fail0verflow answering him Twitter