errno 19 couldn t mount hd

hello all i have one problem for installing myps2 i give you my config .dat
i don t understand why this config .dat don t work ...
i have one pstwo v10 7004 with matrix infinity bios 1.82
thank for help me ...
my config.dat:


scr_adjust_x = 0
scr_adjust_y = 0
scr_mode = 255
scr_screenshot = 1
scr_path = host:/
tbn_caching = 1
tbn_cache_path = pfs0:/THUMBCACHE/
net_enable = 1
net_ip = 192.168.0.10
net_netmask = 255.255.255.0
net_gateway = 192.168.0.1
net_dns = 195.50.140.114
net_smb_debug = 0
ftp_enable = 1
ftp_port = 21
ftp_anonymous = 0
ftp_login = myPS2
ftp_password = myPS2
radio_cache_list = 0
lang_file = english.xml
lang_charset = ISO-8859-1
skin_name = default
time_timezone = 60
time_dst = 0
part_mount_list = hdd0:+MYPS2

hdd_boot_part = hdd0:+MYPS2

hdd_boot_path = /MYPS2/

thank a lot

Quote:

---

Originally Posted by celica

part_mount_list = hdd0:+MYPS2

hdd_boot_part = hdd0:+MYPS2

hdd_boot_path = /MYPS2/

---

These three lines might by why it's not loading properly.
If you have the myPS2 application and CONFIG.DAT in your hdd0:+MYPS2/ partition, try these 3 things.

1) remove the part_mount_list line. This is attempting to mount the same partition twice.

2) change the hdd_boot_path = /MYPS2/ to
hdd_boot_path = /

3) remove the blank lines in the CONFIG.DAT file. myPS2 stops reading the config file after the first blank line.

That should help you boot myPS2.
Mike

no it s not working i make all changing ...
i have the same errno 19
why i have that ....
did myps2 work with hd combo ....
i put the usbd.irx ...
and nothing plese help me ....

I had this same problem. I am assuming that you transferred your /myPS2/ folder from your MC to the partition that you made before you tried to start it. But you will have to transfer it back to either the another partition on the hdd or back to the MC to start the file. It can't be run from the partition that you created for it.