The above video goes away if you are a member and logged in, so log in now!
Need UlaunchELF Assistance
Need UlaunchELF Assistance –
My PS2 Specs are:
I also have the official sony hdd installed that came with FFXI.
My memory card is the official sony brand but does not have to memcard update file from FFXI that updates the PS2 drivers when the card is inserted.
I have SwapMagic 3.8 dvd and cd disks.
I have the updated Noobie_Package with uLE v4.42a in it.
I made a SWAPMAGIC folder in the root of the usb flash drive and placed uLE v4.42a's BOOT ELF inside of it. Then I changed that BOOT ELF to SWAPMAGIC ELF. I inserted the usb flash drive in the PS2, put in my memory card, put in swap magic disk, and turned on the PS2. Playstation 2 logo appears and disappears. Black screen; Swap magic never loads and the orange light on the flash drive stays on. Nothing else happens. When I load the disk without the flash drive, swap magic boots up fine. I have tried 3 usb devices; a MicroSD usb2 point 0 adapter with a class 4 and class 10 microsd card in it (sandisk), and i have tried an Optima Pro Attache 4G usb flash drive in it.
What could be going wrong as to why uLE v4.42a is not showing up?
PS - I didn't put a dot between 2 point 0 and before the ELF because forum counted it as a link for some reason and it says that I cannot post links until after a certain amount of posts.
Edit: nevermind. found 4 more flash drives laying around the house and only one of them booted this program.
Last edited by shinra358; 10-22-2011 at 02:20 AM.
Originally Posted by shinra358
and use the "uncompressed boot.elf" (rename it, and put in your SM-folder)
If that donīt work too, try to download an older version of uLE (4.39 or so) and take the "uncompressed boot.elf).....
USBD.IRX in SMv3.6/3.8 is old and buggy. Cannot be compared for this which actually everyone using on scene. Compatibility is low (and sometimes better with FAT16, i don't know why).