The above video goes away if you are a member and logged in, so log in now!
FTP support –
Hum.. I must be missing something easy.. I can't ftp to the ps2 while running luanchelf. Little background. execftps works. Light on router for ps2 is on, shows up in router config as and attaced device with the right ip address, i can ping the ip address of the ps2, but connection refused when i try to connect using flashfxp. just useing anon connections. is there suppose to be a un/pw? what else am i missing here? any help is appericated.
apperantly i am just slow.. I got it working. i wasn't loading the ps2net modules. so there now you can /point and /poke at me..
Please explain how you did it because i can only get flashfxp to work...
:::::::::::::::::::::::Together We're Heavy:::::::::::::::::::::::
Im not going to make excuses for my english because my swedish is just as bad.
Install Matrix infinity in my SCPH-3004R : DONE
Controller vib led mod : DONE
Memcard led mod With "active" leds! : DONE
Total case makeover with "active" leds and cathode : DONE
(Download zipped avi file at http://web.comhem.se/~u73705004/totalcasemakeover.zip
Installed a 120GB western digital : DONE
installed a resetbutton in controller : DONE
All you need for ftp support is to run MISC/PS2Net.
Assign MISC/PS2Net to a button then press the button it's assigned to. It works just like execftps as it uses ps2ftpd.
late as usual.. but yeah what they said.. i wasn't loading misc/ps2net and was just expecting it to work.. (damn microsoft for getting me so lazy)..
so do I have to change everything in launchelf to match what it said in EXECFTP also is ps2net as buggy as execftp was
on pc, start ps2 client with following string.
c:\ps2client.exe -h 192.168.0.10 listen
If u run ps2 client from other dir and have other ip, edit the string.
then on ps2 enter host again.
now u see the dir that ps2 client were runned from.]
ABOVE() thats the part i dont get LOL
Yes, ps2net is just like EXECFTP bugs and all. Although I have gotten rid of a few bugs and added support for usb mass through ftp. So in some ways you could say ps2net is better than EXECFTP and that LaunchELF's ps2net has pretty much replaced EXECFTP.
Originally Posted by ddrfreak
As for the ps2client stuff that is for host: support. Dlanor has some good explanations of how to use it in other threads. It's much faster than ftp and you can do all the grunt work on the ps2 side where as ftp is done on the pc client side. Both do indeed have there uses.
Ok i was able to get into ftp with launchelf but i could not find ps2client so i opped out to use FlashFXP. Now i can connect and i finally see mass but now i can not see hdd. Is thier something that im doing wrong.
You don't need the hdd folder if that's what you're referring to. Dlanor and I decided it was not necessary because all you really need is the pfs folder. All the hdd folder did was show the partition names. You can get the available partition names from launchELF's filebrowser if you need them.
Originally Posted by ddrfreak
The commands are just like before like: "SITE MNT /pfs/0 hdd:+MAIN" and "SITE UMNT /pfs/0".