Okay, I've been searching around, have a pretty good idea how to do it so I won't waste any time there. What I'm experiencing is ule (ulaunchelf) doesn't recognize any USB ports after using the ELF exploit. Here's what happens but first the goods:
PS3 - 60GB CECHA01 (01/2007) Version 3.01
Swap Magic CODER v3.8
128MB Micro-SD + USB Micro-SD reader
uLaunchELF v4.40 and/or V4.39
1.) Using ulaunch on PS2 I copy the saves I want to .psu format on the 128MB flash.
2.) Copy ulaunch to my flash drive creating a folder named SWAPMAGIC and renaming ule to SMBOOT0.ELF.
3.) Load up SwapMagic 3.8 on my PS3 then load up ulaunch.
4.) ulaunch loads up without a hitch but after that, no USB ports are recognized/found.
I've tried swapping out using a PSP (PSP-1000) as the USB drive and after ulaunch loads that too is undetected. At start up it reads the CNF file was loaded (Off mass, or m0 if I set it to.) but nothing works after that. I'm at a loss here on why the usb isn't found seeing as the later versions of ulaunch are supposed to have built-in USB support (the versions I'm using.) and hope someone might be able to shed some light on this. Thanks.