The above video goes away if you are a member and logged in, so log in now!
Anyone encounter the hanging at "Initialzing SMS"
Anyone encounter the hanging at "Initialzing SMS" –
I am runiing SMS 1.4 rev7 via ulanunchelf 3.41n and many times the SMS hanging at "Initializing SMS" and i have to clear the mc0:/SMS to make it work again ,anyone encounter this before and any solution suggest?Thanks
Last edited by jacky401; 11-08-2005 at 12:08 AM.
I had hanging with some versions of USBD.IRX in mc0:/SMS
Once I found the version from GT3 to work, SMS launches fine. Sounds like you have a different problem though, considering how EEUG replied to your first post.
also have mine hang...And im sure that the usbd.irx file is off limits.
I start sms from the memory card and hang happens when there is no disk into the playstation.
Last edited by lido; 11-08-2005 at 09:15 AM.
After several testing ,i burn the sms.elf on the CDR and run ,no problem at alll.However ,if run from MC using ulanchelf 3.41n ,then hang again.
I have the same problem, it says "Initializing File context" and its stuck. Could not even reset the PS2. Had to power off the switch from behind.
Is there a solution? I'm also using ulanchelf 3.41n but I'm running it from the CD, not the MC. And I do not have usbd.irx in the MC as well.
I've tested in my v10 and no prob, from MC/HDD without a disk in tray...
Take a look in the option disk control in Ulaunchelf, I know that if turned off solves the problem for v9 and over...don't know for lower versions, also remove USBD.IRX you may have in locations showed in SMS readme:
USBD.IRX is not included (licensing issues). SMS looks for it in:
*** in aforementioned order ***;
PS2 V10 NTSC / MI v1.82 / ULE 3.80 / SMS 1.7.5 / HDL 0.8 / 300G HDD
mine is either v7 or v8. still no luck. disk control turned off but still hang.
I found no USBD.IRX in any directory. Where can I get the readme for the sms?
I also hang still even turn off disc control
BUT ,before u run the SMS.elf run MC ,eject the disc inside the tray then stary the SMS.elf ,everything should be fine!!!
Sigh, I copied the sms.elf to mc0:/SMS/
ejected the disc and then only start SMS.elf.....still the same....just hang there. Could it be I got a buggy version of the sms.elf?