The above video goes away if you are a member and logged in, so log in now!
Why V9 keep rebooting after mod?
Why V9 keep rebooting after mod? –
Installed Neo12 and did the LA chip protection mod.
After power up, there are booting video/audio, the laser clicks for 1-2 seconds, then it reboots, meanwhile the blue eject led blinks.
I removed the mod chip, replaced PS11 fuse which I believe was blown. The problem is still there.
Does anyone know what is the cause of this symptom?
Thanks a lot!!!
more symptom –
After neo12 is removed, when booting, the tray automatically ejects regardless if there is disc or not; then after the tray goes back, it immediately shows a black screen then reboot again.
sounds like a couple problems to me. I would check the L/A chip (where you did the romeo mod) to make sure thats all good, no bridges there. I would look at your solder points again as well.
How to check the LA chip?
How to check the LA chip? –
I checked the resistance between the romeo mod leg and adjacent legs. The readings were quit low, like 2-3 ohms. Does this sounds correct to you?
Ref +: psaras, marcus21, sirusxXx, gamecubesuxs
i'd say your ps2 is posessed
Originally Posted by richardfree
Can you reverse the romeo mod?
Else double check you did the right pin. (3rd pin)
Make sure you didnt put any pressure on the other pins as they can disconnect easily.