V14 not powering up and no standby light

[necromanx]

Hi,

I have a v14 wich i modded recently. Worked like a charm untill now. For some reason the red light from standby is no longer giving the red light and pressing the button wont make the console boot.
I tried another adaptor checked the voltage on the motherboard wich is 8.5 so it is receiving power :S.
I found fuses wich arent working and i replaced the ribbon cable and the button to check if that was the problem.
I am left in the dark since i have no idea what to check now Sad.
also does anybody have a picture of the location of the fuses on the 14.
If anybody can help me out i would greatly appreciate it!!!

Thanks in advance

[jetcat]

check your B.G.H.I.F points and make sure no one is loose or touching the the board next to the small via´s.If so your power button and consolle doesn´t work

[necromanx]

I allready remove the modchip.
I might check if those vias are shorted!

[EDIT] Check it out, cleaned it up and nothing seems shoterd still no standby red :S.

[necromanx]

my motherboard is recieving power i am sure about that but when its plugged into power should Point A(3,3v) read 3,3 when its supposed to be in standby because Point A doenst read 3,3 when the mobo is recieving power.