V12 Rs2004Fs problem?

**jetcat** · 03-17-2006,12:17 PM

IÂ´ve got a customers Ghost2 chipped v12.1 in last week.
ItÂ´s about 1 year old.And suddenly it stopped read anything.
The cd drive just spin and stop spin and stop.So IÂ´ve tried with a new laser
(PVR cause thatÂ´s what it was org.)Nothing happened the probs are still there.So IÂ´ll removed the chip and measured all fuses and they were all ok.Tried with a new RS2004FS chip and still the same prob?
Does anyone have any idea????

**pegz** · 03-17-2006,01:03 PM

did you apply any fixes?? sometimes if resistors are damaged during summones fix it gives those symptoms. i would double check them

P

**nixnox2004** · 03-17-2006,02:52 PM

which resistors do you refer to?

**pegz** · 03-17-2006,06:46 PM

the resistors you apply the summ0ne fix as shown in the attached diagram.

any damage to these could give you the probs quoted above

P

**jetcat** · 03-18-2006,06:44 AM

Ok I´ll try to change the 303 smd:s cause the machine has only the first SumOne fix with a single 560 ohm´s resistor.I will come back with the result later

**jetcat** · 03-22-2006,03:12 AM

I´ve changed the SMD resistors with no luck.It´s just like before.Is it something else that´s f****d up?

**Lukas123** · 03-24-2006,02:53 AM

Do you have red light on lasere diode ???

**jetcat** · 03-24-2006,06:57 AM

Yes the laser shines up.But if it´s enough is hard to tell.

**Lukas123** · 03-24-2006,07:35 AM

1. Do the summ0ne invisbile
2. Look in your system configuration is there your model number ??

**Lukas123** · 03-24-2006,07:38 AM

1. Do the summ0ne invisbile (do it once again coz i have couple of issues with bad smd resisitors. use hot-air gun and solder flux after that clean it with isopropanol. Second thing look at your connections tape with laser and stepping motor.
2. Look in your system configuration is there your model number ??

User Tag List

Thread: V12 Rs2004Fs problem?

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!