v12 not spinning fuses are good

**gixxxer** · 11-24-2006,08:48 PM

i have a v12 slim ps2 that will not spin the disc. i have replaced the whole laser assembly as well as replacing the one bad fuse (ps7). all other fuses check out. the laser moves and blinks once. i'm not sure where to go from here. i checked the 303 resistors and they are registering 19.5k. i thought that was kinda weird. Another weird thing is that controller port 1 doesnt function but two does.

can anyone help?

by the way, no modchip installed. i tried the neo fix xiv but it didnt help. after installing it kept turning itself off and i know i had it installed correctly.

**gixxxer** · 11-27-2006,06:56 AM

nobody with any ideas?

**kl1k** · 11-27-2006,08:25 AM

the 303's should measure 30k - i'd replace them.

Failing that if the fuses are good) and the resistors are good (i'd still replace them even if they measure fine) then it could be a blown rs2004

**chrisbutt** · 12-16-2006,04:27 PM

Just fixed similar problem in a v12, PS13 400mA fuse was the fault. Tried bridging it temporarly and it worked so just replaced it.

**jetcat** · 12-25-2006,08:33 AM

Check the little switch on the board so the lid close it.Not the one on the powerswitch.But the one behind the laserunit.

**l_oliveira** · 12-25-2006,03:33 PM

Yeah the lid switches do fail a lot....
But sometimes the case of the PS2 do bend with heat if the owner leaves in the car or close to a window which can let the PS2 receive direct sunlight.

So check if the disc cover is bent too...

**gixxxer** · 12-27-2006,06:35 PM

it wasnt the lid switches. i'm at a loss. i think i'll just put it up for sale for parts.

**noireau** · 12-29-2006,04:22 PM

i have the same problem... my disc doesnt rotate... the lid switches are ok i think... ... a week ago, my pstwo didn't rotate the disc and gave bad sounds.. i opened it and a screw was in the airing... i checked the side with the Crystal chip... there is everything ok.. and there is nothing black from fire or so...

what is wrong with my pstwo? a fuse? and witch fuse on v12? there are so many

and i havent build in my modchip... it was an expert..

**jetcat** · 01-02-2007,03:16 PM

Did you desolder the solder-bridge on the new laser?
Sometimes the fuses seems to be ok until you put power on and the measure them.

**jenko** · 01-02-2007,04:53 PM

Originally Posted by noireau

i have the same problem... my disc doesnt rotate... the lid switches are ok i think... ... a week ago, my pstwo didn't rotate the disc and gave bad sounds.. i opened it and a screw was in the airing... i checked the side with the Crystal chip... there is everything ok.. and there is nothing black from fire or so...

what is wrong with my pstwo? a fuse? and witch fuse on v12? there are so many

and i havent build in my modchip... it was an expert..

check PS13

User Tag List

Thread: v12 not spinning fuses are good

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!