V12 laser problem

**jenko** · 06-11-2006,11:58 AM

my laser blinks but dusnt move so i have a few questions. 1. do V12/13's without any laser fix installed have contanuity between L2 and K (look at subzewro fix.jpg attached) 2. If i remove a subzero fix would this fix where i cut or not (look at bridge.jpg attached)

**jenko** · 06-14-2006,02:12 AM

bump

**davbere** · 06-14-2006,02:45 AM

no thee is no continuity between L2 and K.
Yes that bridge would fix the cut trace... but if its a v12 you need a laser fix.

**jenko** · 06-14-2006,07:59 AM

thanks for answering. i ask this becuase my ps2 has the problem stated above and it is exactly the same as when u dont connect the k wire on a subzero fix but it hapnes without the fix even solder on so any sugestions would be apreciated

**davbere** · 06-14-2006,12:24 PM

test the fuses ps14 is most common also ps11

**jenko** · 06-14-2006,01:21 PM

thanx but forgot to mention all fuses are fine.

**davbere** · 06-14-2006,02:28 PM

It could also be the ocus and tracking resitors the fix was soldered to. Those are easily damaged. Test them with a muktimeter.

**jenko** · 06-15-2006,02:10 AM

both tracking still read about 683 ohms and i didnt install the focus fix.

ps: the ps2 was working with a subzero fix and mi chip untill i tryed install hd connect but was laisy so tesasted it without the laser in and withouth the screws in, amd the shell wosnt fully straight and did somethin coz the ps2 just lit up green for a second then whent red bt straightning up the shell fixed that but from then on the laser didnt move but it still blinks.

User Tag List

Thread: V12 laser problem

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!