**LATEST V12 REVISION**
By soldering 2 resistors to the ps2 mainboard, we can limit the maximum power on the laser lens coils, protecting the ps2 from modchip bad sideeffects :-)
Rst .............for 95% protection
Rst+Rsf ......for 100% protection
-Use 1/4W resistors because their pins are less stiff.
-Bend the pins so they align to the solderpoints = no strain on delicate
-Don't heat the solder points for too long - you can burn the smd resistors.
-Dont let the pins be in contact with anything other than the solder points.
-Clean at the end with a q-tip + acetone.