some questions to clear things up!
PLZ PLZ don`t flame me I`m just a noob (as YOU was a time ago ;) )
(plz answer red marked questions if you have time for me!)
I will begin with my problem:
got a V12 pstwo >>> Matrix Infinity installed >>> NO FIXES installed :lol: >>> laser doesn`t move (and it isn`t making a KRRRRRRRRR sound :banghead: ).
I`ve checked ALL fuses, all have continuety, that means ALLWAYS fuses are OK, or is there another better method? And is it true that there are allways 17 fuses in pstwo? (v12/v16)
Now I guess it`s the coils, I`ve measured it with this diagram:
green focus coils: 40.3
red tracking coils: 40.9
green focus driver: 2.283
red focus tracking: 1.914
What`s different between driver and coil?
Are the coils right?? And what if the coils on the mobo ain`t right, then I can trow the mobo away?? Isn`t there any LA/BA (sort of) that can cause this problem? Something with RS.......
And if I measure the coils on the laser with this diagram (scroll down):
the results are:
the 2 in the middle: 5
one on the right side and the one at the left side: 5.1
But IF I measure coils with this diagram:
It give me this results:
WTF if going on :banghead:
And just one question about the SubZero, if I follow this diagram:
I see: CUT, does that mean that I have to cut if with my solderiron or something?? :banghead:
And I see: JMP1/2 >>> should I bridge it? And what to do with the green indicated: RESISTOR?? That isn`t needed right?
And WHY I can`t find the L1 point, indicated on the subzero fix? :chinscrat
I know I ask A LOT, but may be other people will learn something from all this??