PSTwo V12 won't start

[pinkywinky27068]

hello people,

I have a problem with a pstwo version 12.
I modded this pstwo with a modbo 2.0 + the diode fix that was delivered with it, the pstwo worked for three days after that it wouldn't start anymore.
when i push the power button it goes green and directly goes back to standby. I removed the chip + the diode fix but it doesn't resolve anything.
Can someon help me on this isseu. :banghead

[cakcetin]

Check all fuses, specially PS14.

[pinkywinky27068]

Where can i find a layout of all the fuses in pstwo version 12

[cakcetin]

Here: http://discountmods.com/Ps2scene/Fus...-032-fuses.jpg

[pinkywinky27068]

i've checked all the fuses with my testofoon and they are all good, but i tested also an other component look at the picture i put in this message .
this component doesn't BEEP on my testofoon does that mean it,s dead.
in the left corner of the picture.

[cakcetin]

It's a capacitor so it's not dead.If all fuses ok,check reset point and clear reset area carefully.If this cannot help you please use search.
Sorry for crappy English.

[pinkywinky27068]

What do you mean with clearing the reset area??
(mine english is als not too good)

[kl1k]

if all else fails, remove the mod, check for solder splashes around the solder areas, and use alcohol to clean up all the flux from the soldering.

[pinkywinky27068]

Can it be that the laser is burnt.
I don't know what happens with the ps2 if that burns.

[kl1k]

yip - its possible the laser could be dead.