The above video goes away if you are a member and logged in, so log in now!
ps2 subzero fix –
I am trying to install the subzero fix on a ps2 v12 before I install a modchip. However, I am not an expert at soldering and, therefore, not familiar with some of the terminology. I am using this diagram http://www.quantronics.com.au/suppor...ix/szX-new.jpg. I do not know what "cut" means (the pointer in red). Also, when soldering a point of the subzero fix to a transistor (for example, point T1), should I cover the whole transistor with solder, or just the metal part on the end? Again, sorry for asking stupid questions, but I really don't wanna mess this up. Thank you for your help.
Whit cut they mean the english word cut. Found this on google:
- make an incision or separation; "cut along the dotted line"
They basicly mean that u cut the line where the red line is. If u have done that correctly you should measure nothing between L1 and L2 with your multimeter (assuming that u have one and if u don't get one!). And you should only solder the metal part at the end.
Hope it helps and post your pic when you installed your mod