How do you guys do it? Okay, I'm new at this but how do you do your microsoldering? I have all the necessary supplies (received from http://www.cmh.net/). I bought a 12w antex soldering pen with a .2mm tip that to me is not quite hot enough. I just bought another 18w antex soldering pen (same tip) that should arrive shortly but how do you do your microsoldering? You know what I'm talking about. Where you have to be stone cold sober with hands of a surgeon. Do you lay a touch of solder down first, then remelt the solder while holding the wire against it? Hell, that would be easy as long as you can quit breathing while you are doing this. I know...practice, practice, practice. I did today for appx 3 hours and it seems like this is about 1000 hours of practice away. I am trying to learn this as a hobby not a way to save or make money so sending this out to the pros is not an option. I'm intrigued by this but there has to be a secret. I have plenty of mb's to practice on but to solder on a bios chip with the legs so close to each other seems literally impossible. Come on guys, give it up, what is the secret, how can it be done in 100 hours or less of practice??????