installing chip in ps2

**sephir420** · 01-11-2006,01:19 AM

any tips on how to solder to the 4 bios pins in a v7 without spiling solder onto the next pin. it is a major pain in the butt. or if you know of any place in utah that will solder it for you.

**nektheheck** · 01-11-2006,08:34 AM

Hi,

you could try putting a razor blade on each side of the pin you need to solder to avoid spilling. I read about here:
http://www.infinitymod.com/Install/MX-INST-GUIDE.htm

Cheers,

Nek

**EspeN** · 01-11-2006,09:00 AM

Those pins are not hard at all if u have correct equipment.

I just add flux on all 4 pins, then add solder to them
Then i attach the wire and solder them on.

The flux help it stays on that pin.
If u bridge, remove wire, add more flux, heat the pin and the solder goes over to just one pin and bridge removed.

User Tag List

Thread: installing chip in ps2

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!