HELP needed on V14 soldering

Hi,

I'm doing my first soldering on a V14 GH-041-34.
I'm using a Matrix Infinity and I can't solder points A, B, G and H.
They are real small and they were coated.

Any solutions?

Thanks

You can use a razor blade and scrape the coating from the points, but you have to be extremely careful when doing that.

Use a fibre glass pen will remove the laquer, will prob remove the green coating too so be carefl when soldering and double check that you don't ground anything.
Once you have removed the laquer its plain sailing from there.

also dont hold soldering iron on those points too long or you will stuff them
only a second or 2 at a time