The above video goes away if you are a member and logged in, so log in now!
after MOD ps2 black screen
after MOD ps2 black screen –
i have a ps2 scph 70001 after i mod with MODBO 4.0 got black screen(my bad). I even removed MODCHIP and i still got black screen problem. I cannot hear any sound.. but when i turn on, the power switch led turn green from red(off).
Actually this is the first time i got this problem, i mod a few ps2 slim even 90series and the old fat ps2 have no problem when i put mod chip (modbo 4.0)
Is there any fuse or way to do with my ps2?? Got screwed on searching which part will i replace. Thank you in advance.
make sure there is no bridge or short between solder points when you removed the chip or even when you installed .
thank you for the fast reply amp2006, i cleaned the board already and check for those short in the microscope. There is no any short or residue from the solder points. Maybe there is a blown resistor or capacitors in it, or maybe an ic. Guide me those.
well then in this case you need to use Multimeter .i am not so good at stuff but only have some info .