5v and 12 v?

**celica** · 07-17-2006,10:16 PM

where i can to find 5 v and 12 v for connecting hdd ide with pstwo 7004 ?
because i don t want to use extern power ...
thank a lot all

**Katagia** · 07-18-2006,03:45 PM

The external DC adapter has an output voltage less than 12V.
It might be possible there are 12V anywhere on the board but
I think your chances are bad.
Maybe use a 2,5' harddisk? It needs only 5V and 500mA.
You should be able to get the power from one of the usb ports
as a usb port should provide enough power.
But be carfull: The maximum allowed current of usb is 500mA so
you shouldn't use the modded usb port anymore.

I'm not a pstwo modder so others might be more usefull.

**celica** · 07-23-2006,06:23 PM

thank a lot but i see in the board ...one place for 12 and 5 v but i don t know if that is working in the memory card and joystic too ...
i have 12 v and 5 v ...
can i take this power ? or is too little ...
thank a lot

**l_oliveira** · 07-24-2006,07:57 AM

There is no 12V on the PS2 slim mobo. You need a external power supply to make the HDD run with it.
Same thing with the SCPH-10000. It's internal PSU is 8.5v so it can't power a HDD without a external power adapter (the original HDD for it comes with a 12V power supply)

User Tag List

Thread: 5v and 12 v?

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!