XO-2 Installed with alternate points

[Loco]

Finally the XO-2 was installed! I used the points LOD stated instead 2 Vias and now I can say they really work!

Now only the On/Off switch is left (I forgot to buy more wire for 3.3V)... I'll update this as I go into the switching.

What can I tell now from my XO battle:

Problem:
PS2 doesn't show video, the eject and power lights turn on normal, pressing eject only flashes the led but tray doesn't come out.
Solution:
"C" point not connected properly

Problem:
Everything boots but PS2DVD (Movies works)
Solution:
"N" point not connected properly.

I know those points cannot be taken as a rule (there can be another loosy points) but that was what happened to me.

Greets!
[Updates coming up next ]

[lostinnil]

Originally posted by Loco
Finally the XO-2 was installed! I used the points LOD stated instead 2 Vias and now I can say they really work!

Now only the On/Off switch is left (I forgot to buy more wire for 3.3V)... I'll update this as I go into the switching.

What can I tell now from my XO battle:

Problem:
PS2 doesn't show video, the eject and power lights turn on normal, pressing eject only flashes the led but tray doesn't come out.
Solution:
"C" point not connected properly

Problem:
Everything boots but PS2DVD (Movies works)
Solution:
"N" point not connected properly.

I know those points cannot be taken as a rule (there can be another loosy points) but that was what happened to me.

Greets!
[Updates coming up next ]

"Works" means? All of the original functions are still there? Where are the alternative points?

[lostinnil]

Ok, I found the thread abt the alternative points. But still want to hear from you more details abt the results.

[Loco]

Originally posted by lostinnil
Ok, I found the thread abt the alternative points. But still want to hear from you more details abt the results.

Sorry, I forgot to say I've first XO-2 version (without new "K" point)

I meant that this works:

PS2 CD Orig
PS2 CD Backup
PS2 DVD Orig
PS2 DVD Backup
PS1 Orig
PS1 Backup
DVD Movie (no skipping)
Gameshark

I'll post more results when I get the wires for installing the switch.

Greets!

[Loco]

Well, bad news...

As I suspected switching "Reset" only disallow the use of PS1 games, since the XO cannot send the "button pressed" info..

But I really thought "3.3V" would work, but it isn't If switched, then the screen remains black and the PS2 don't even boot. I was afraid this could happen, but I didn't really think it would.

Any other ideas to turn off the XO? The only other wire I can test is "SCEX" to check if original mod protected games work...

Any idea will be appreciated!

Greets!