Printable View
Hey all,
Well i did a PSTwo for a customer with an MI and Neo Fix XII, i have been through it many 'o times and redid a bunch of solders, and i am at a loss... I have not had this problem before, what happens is the machine while cold will not boot(RSOD) anything including origionals, DVD, CD, ect... Once the machine is warm i get about a 75% boot ratio...
It looks like this just with blue wire not yellow...
Thanks in advance for any input on my problem...
Do you try change lens?Or do you have a wide lens?
I guess you already tried changing the modchip ?
Great looking install btw ;)
remove the Neo Fix XII and mesure the resistors it connects to, if they are ok just ad summ0ne´s fix for tracking.
yah take off the neofix and then try the system. I would also try using a different power supply as well. Since its not booting originals it must be something besides the chip.
happend to me too, I replaced the "Y" point witht he type of wires your using for power and it worked perfectly. So I do that on all my installs, know.
Thanks guys, i haven't had time to go into it again, but thankfully i had a loner for him, so he isn't in a hurry for it, but i will let you all know how it goes...
Thanks again!
Thanks for all your replies people, i did find the problem... It ended up being one of the 303 resisters on the connections to the Neo fix, it was an intermittent open circuit, i replaced the resister and all was good...
Once again thanks for the help and the point in the right direction...
Good day